Problem Hub
Last updated:

How to Fix PRINTER Error PRI-11907

Device: printer Code: PRI-11907 Read time: ~1 min

Share this guide or save it for later.

Meaning

printer error PRI-11907 typically appears when network dependencies are misconfigured or locked. Printer failures are usually caused by queue state, connectivity (USB/Wi‑Fi), driver mismatch, or firmware state drift. The fastest fixes clear the queue, re-establish the connection, then validate the driver and firmware layer.

Common Causes

  • network dependency mismatch
  • Corrupted system component
  • Permissions or policy conflict

Common Scenarios

  • Error appears during network workflow after update.
  • Issue repeats after restart when background services load.
  • Failure is isolated to admin-level operations.
  • The issue appears right after a system update while applying package changes for PRI-11907.
  • The error is triggered only for administrator actions and service startup flow on printer.
  • The failure repeats after reboot because dependency files are still locked by another process.

Quick Fix

Quick path for PRI-11907: - Power cycle the printer (off 30 seconds), then power it on and retry. - Check connection: USB cable seated or Wi‑Fi connected to the correct network. - Clear the print queue and retry one test page. - Set the printer as Default and ensure it is not paused/offline. - Restart the Print Spooler service (Windows) if jobs are stuck.

Advanced Fix

If it persists: - If the error indicates hardware (fuser/paper path), inspect for jams and run vendor diagnostics. - Reset network settings on the printer and reconnect to Wi‑Fi. - Try printing via a different interface (USB vs Wi‑Fi) to isolate connectivity. - Update printer firmware if the error repeats after reboot. - Remove and re-add the printer, then reinstall the latest driver package.

FAQ

What does PRI-11907 mean on printer?

PRI-11907 indicates an execution conflict during a critical network operation.

Can I fix PRI-11907 without reinstalling?

Yes. Most cases are solved with restart, integrity checks, and dependency reset.

Can I ignore PRI-11907 on printer?

No. Ignoring PRI-11907 can block updates or degrade system stability. Apply the quick fix first, then advanced steps if needed.

How long does it take to fix PRI-11907?

Typical recovery takes 10-30 minutes. Deep repair scenarios can require up to one hour including reboot and validation.

User Reports

  • [MEDIUM] printer users resolved it after clearing pending update cache.
  • [MEDIUM] Issue disappeared when conflicting startup utility was disabled.
  • [MEDIUM] printer user restored normal updates after running DISM and restart sequence.
  • [HIGH] Issue reproduced during install pipeline, then fixed after permissions reset for system folders.
  • [LOW] Error cleared after disabling conflicting third-party service and re-running setup.

Common Fixes for 2024

Newly Reported Errors

Recent Trending

Recently Updated

Most Searched (Cluster)

Was This Helpful?

Your feedback helps us prioritize improvements.

Next Troubleshooting Steps

If the issue persists, continue with the most relevant adjacent guides below.

  1. How to Fix PRINTER Printer Not Printing
  2. How to Fix PRINTER Not Working
  3. How to Fix PRINTER Stuck
  4. How to Fix PRINTER Keeps Stopping
  5. How to Fix PRINTER Unavailable
  6. How to Fix PRINTER Ink Error
  7. How to Fix PRINTER Not Recognized
  8. How to Fix PRINTER Jam Error