Problem Hub
Last updated:

How to Fix PRINTER Not Found

Device: printer Code: not found Read time: ~1 min

Share this guide or save it for later.

Meaning

This guide covers printer issue "not found" with a staged diagnostic path and safe recovery steps. Printer failures are usually caused by queue state, connectivity (USB/Wi‑Fi), driver mismatch, or firmware state drift. The fastest fixes clear the queue, re-establish the connection, then validate the driver and firmware layer.

Common Causes

  • Temporary state mismatch after partial updates.
  • Conflicting background service or cached artifacts.
  • Network, account sync, or permission constraints.

Common Scenarios

  • Issue appears after an update or configuration change.
  • Failure repeats after restart when background services load.
  • Problem triggers only under specific network or permission conditions.
  • The issue appears right after a system update while applying package changes for not found.
  • The error is triggered only for administrator actions and service startup flow on printer.
  • The failure repeats after reboot because dependency files are still locked by another process.

Quick Fix

Quick path for not found: - Restart the Print Spooler service (Windows) if jobs are stuck. - Set the printer as Default and ensure it is not paused/offline. - Clear the print queue and retry one test page. - Check connection: USB cable seated or Wi‑Fi connected to the correct network. - Power cycle the printer (off 30 seconds), then power it on and retry.

Advanced Fix

If it persists: - If the error indicates hardware (fuser/paper path), inspect for jams and run vendor diagnostics. - Reset network settings on the printer and reconnect to Wi‑Fi. - Try printing via a different interface (USB vs Wi‑Fi) to isolate connectivity. - Update printer firmware if the error repeats after reboot. - Remove and re-add the printer, then reinstall the latest driver package.

FAQ

What is the fastest fix for PRINTER not found?

Start with quick steps first, then apply advanced recovery only if the issue reproduces after restart.

What is the most common cause?

Most cases are caused by state drift after updates, cached artifacts, or connectivity and permission conflicts.

Should I reinstall?

Only as a last resort. Validate the quick and advanced steps and confirm the root cause before reinstalling.

How do I confirm it is fixed?

Repeat the exact failing workflow twice after applying a fix and monitor whether the symptom returns after restart.

What should I try next if it keeps happening?

Use related links from the same cluster to compare neighboring signatures and isolate the root condition chain.

Can I ignore not found on printer?

No. Ignoring not found can block updates or degrade system stability. Apply the quick fix first, then advanced steps if needed.

User Reports

  • [MEDIUM] Resolved after clearing cached artifacts and restarting.
  • [MEDIUM] Stopped happening after disabling a conflicting background app/agent.
  • [MEDIUM] printer user restored normal updates after running DISM and restart sequence.
  • [HIGH] Issue reproduced during install pipeline, then fixed after permissions reset for system folders.
  • [LOW] Error cleared after disabling conflicting third-party service and re-running setup.

Common Fixes for 2024

Newly Reported Errors

Recent Trending

Recently Updated

Most Searched (Cluster)

Was This Helpful?

Your feedback helps us prioritize improvements.

Next Troubleshooting Steps

If the issue persists, continue with the most relevant adjacent guides below.

  1. How to Fix PRINTER Error 0X0000011B: Printer Error
  2. How to Fix PRINTER Error 0X00000709: Printer Error
  3. How to Fix PRINTER Windows Printer Error 0x0000011b
  4. How to Fix PRINTER Windows Printer Error 0x00000709
  5. How to Fix PRINTER Brother Printer Offline
  6. How to Fix PRINTER Epson Error 0xe8
  7. How to Fix PRINTER Epson Error 0x97
  8. How to Fix PRINTER Epson Printer Offline