Problem Hub
Last updated:

How to Fix SMART-TV Error SMA-11370

Device: smart-tv Code: SMA-11370 Read time: ~1 min

Share this guide or save it for later.

Meaning

smart-tv error SMA-11370 typically appears when update dependencies are misconfigured or locked. In practice, SMA-11370 on smart-tv usually means a dependency chain failed: configuration, runtime services, permissions, network, or cached state no longer match expectations. Most fixes work best when applied in order: stabilize the baseline, isolate the trigger, then apply one corrective action at a time and verify the result.

Common Causes

  • update dependency mismatch
  • Corrupted system component
  • Permissions or policy conflict

Quick Fix

Quick path for SMA-11370: - Check storage space on the TV; delete unused apps if storage is low. - Sign out/in of the affected app, then retry. - Check for TV firmware update and install once, then reboot. - Avoid updating during unstable power/network. - Power cycle the TV (unplug 60 seconds), then retry. - Restart router/modem and re-test streaming/app access. - Confirm the TV date/time is correct (wrong time can break DRM/logins).

Common Scenarios

  • Error appears during update workflow after update.
  • Issue repeats after restart when background services load.
  • Failure is isolated to admin-level operations.
  • The issue appears right after a system update while applying package changes for SMA-11370.
  • The error is triggered only for administrator actions and service startup flow on smart-tv.
  • The failure repeats after reboot because dependency files are still locked by another process.

Advanced Fix

If it persists: - Disable VPN/Proxy/DNS filters on the router temporarily and re-test. - Turn off HDMI‑CEC temporarily if HDMI devices trigger UI issues. - Run the TV built-in device care/diagnostics if available. - As a last resort: factory reset the TV (note accounts and settings). - Reset network settings on the TV, then reconnect to Wi‑Fi/Ethernet. Verification: - Re-test the same content/app twice after a fix. - Reboot once and re-test to confirm the fix is stable.

User Reports

  • [MEDIUM] smart-tv users resolved it after clearing pending update cache.
  • [MEDIUM] Issue disappeared when conflicting startup utility was disabled.
  • [LOW] smart-tv user restored normal updates after running DISM and restart sequence.
  • [MEDIUM] Issue reproduced during install pipeline, then fixed after permissions reset for system folders.
  • [HIGH] Error cleared after disabling conflicting third-party service and re-running setup.

FAQ

What does SMA-11370 mean on smart-tv?

SMA-11370 indicates an execution conflict during a critical update operation.

Can I fix SMA-11370 without reinstalling?

Yes. Most cases are solved with restart, integrity checks, and dependency reset.

Can I ignore SMA-11370 on smart-tv?

No. Ignoring SMA-11370 can block updates or degrade system stability. Apply the quick fix first, then advanced steps if needed.

How long does it take to fix SMA-11370?

Typical recovery takes 10-30 minutes. Deep repair scenarios can require up to one hour including reboot and validation.

Common Fixes for 2024

Newly Reported Errors

Recent Trending

Recently Updated

Most Searched (Cluster)

Was This Helpful?

Your feedback helps us prioritize improvements.

Next Troubleshooting Steps

If the issue persists, continue with the most relevant adjacent guides below.

  1. How to Fix SMART-TV Smart Tv White Spots On Screen
  2. How to Fix SMART-TV Smart Tv Backlight Issues
  3. How to Fix SMART-TV Smart Tv Brightness Stuck
  4. How to Fix SMART-TV Smart Tv Volume Stuck
  5. How to Fix SMART-TV Smart Tv Language Keeps Changing
  6. How to Fix SMART-TV Smart Tv Stuck In Setup
  7. How to Fix SMART-TV Smart Tv Update Loop
  8. How to Fix SMART-TV Smart Tv Firmware Corrupted