Problem Hub
Last updated:

How to Fix PRINTER Error PRI-11795

Device: printer Code: PRI-11795 Variant: diagnostic-first Read time: ~1 min

Share this guide or save it for later.

Meaning

printer error PRI-11795 typically appears when update dependencies are misconfigured or locked. Printer failures are usually caused by queue state, connectivity (USB/Wi‑Fi), driver mismatch, or firmware state drift. The fastest fixes clear the queue, re-establish the connection, then validate the driver and firmware layer.

Quick Fix

Quick path for PRI-11795: - Restart the Print Spooler service (Windows) if jobs are stuck. - Set the printer as Default and ensure it is not paused/offline. - Clear the print queue and retry one test page. - Check connection: USB cable seated or Wi‑Fi connected to the correct network. - Power cycle the printer (off 30 seconds), then power it on and retry.

Common Scenarios

  • Error appears during update workflow after update.
  • Issue repeats after restart when background services load.
  • Failure is isolated to admin-level operations.
  • The issue appears right after a system update while applying package changes for PRI-11795.
  • The error is triggered only for administrator actions and service startup flow on printer.
  • The failure repeats after reboot because dependency files are still locked by another process.

Advanced Fix

If it persists: - Remove and re-add the printer, then reinstall the latest driver package. - Update printer firmware if the error repeats after reboot. - Try printing via a different interface (USB vs Wi‑Fi) to isolate connectivity. - Reset network settings on the printer and reconnect to Wi‑Fi. - If the error indicates hardware (fuser/paper path), inspect for jams and run vendor diagnostics.

User Reports

  • [MEDIUM] printer users resolved it after clearing pending update cache.
  • [MEDIUM] Issue disappeared when conflicting startup utility was disabled.
  • [LOW] printer user restored normal updates after running DISM and restart sequence.
  • [MEDIUM] Issue reproduced during install pipeline, then fixed after permissions reset for system folders.
  • [HIGH] Error cleared after disabling conflicting third-party service and re-running setup.

FAQ

What does PRI-11795 mean on printer?

PRI-11795 indicates an execution conflict during a critical update operation.

Can I fix PRI-11795 without reinstalling?

Yes. Most cases are solved with restart, integrity checks, and dependency reset.

Can I ignore PRI-11795 on printer?

No. Ignoring PRI-11795 can block updates or degrade system stability. Apply the quick fix first, then advanced steps if needed.

How long does it take to fix PRI-11795?

Typical recovery takes 10-30 minutes. Deep repair scenarios can require up to one hour including reboot and validation.

Common Fixes for 2024

Newly Reported Errors

Recent Trending

Recently Updated

Most Searched (Cluster)

Was This Helpful?

Your feedback helps us prioritize improvements.

Next Troubleshooting Steps

If the issue persists, continue with the most relevant adjacent guides below.

  1. How to Fix PRINTER Windows Printer Error 0x0000011b
  2. How to Fix PRINTER Windows Printer Error 0x00000709
  3. How to Fix PRINTER Brother Printer Offline
  4. How to Fix PRINTER Epson Error 0xe8
  5. How to Fix PRINTER Epson Error 0x97
  6. How to Fix PRINTER Epson Printer Offline
  7. How to Fix PRINTER Canon Error 5b00
  8. How to Fix PRINTER Canon Error 6000